Media Tv community

Enigma 2, AI, Android, Sezam, Smart House, IoT, Google

Sezam community

Пошаговые настройки основных функций

Общий форум для различных тем

by Nikoc49 » 30 Jul 2013, 10:51

Привет всем продвинутым пользователям спутниковых ресиверов Sezam.Приобрел я Sezam
1000HD и заскучал от невежества в области спутникового тв,хотя он уже 9-й по счету.До этого были ресы не очень сложны в настройках,последний -DR HD Grand с закрытым линуксом. У меня 5 спутниковых тарелок одна с мотоподвесом.Четвертый день пытаюсь запустить работу реса с мотоподвесом,но ничего путного не получается.Про недокументированные функции этого реса(шаринг) никто ни где н упоминает. А как запустить
wihi адаптер, 3Gмодемов. Самое странное,что создав это чудо техники,производитель на-
сал инструкцию пользователя на трех страницах,основные функции видимо засекретив.На страницах этого сайта кто-то сравнивал Sezam 5000/1000 hd с GeniosHD который тоже
Энигме 2,так для этого гениуса создана подробная пошаговая инструкция по настройке
основных функций,хотя он made in china (satavto),а корейских Sezamов, шаром покати,нкакой текстовой информации нет. Предлагаю на этом форуме опытным,продвинутым пользователям поделится с нами новичками своим опытом по ннастройке этих ресиверов создав текстовые (а не видео) пошаговые инструкции всех основных функций. Спасибо.
User avatar
Nikoc49
Linux User
 
Posts: 15
Joined: 26 Jul 2013, 14:24
Receiver: Sezam 1000HD

by Debian » 30 Jul 2013, 16:26

Если это у вас первый ресивер на Enigma2, то вопросы могут возникнуть.
Хотя русификация у меню очень хорошая, можно ради интереса походить по меню и открыть много нового для себя :)
Например Wi Fi подключается в меню Сеть, а 3/4G модемы через меню плагины.
Мотор настраивается с том же меню, где и тюнер, что очень удобно, также есть отдельное меню для работы с позиционером.
Все настройки по шарингу есть в этом разделе, остальное в разделе Howto на этом форуме, они одинаковые, как для Sezam 5000/1000HD так и многих других ресиверах на Enigma2 и в этом ничего странного нет.
И потом, чем хуже видеоинстукция кучи слов и картинок?
User avatar
Debian
Admin
 
Posts: 2176
Joined: 14 Feb 2013, 04:53
Receiver: Sezam
Image: EGAMI
Skype: esc.shell

by Nikoc49 » 31 Jul 2013, 05:03

Уважаемый Debian! Все настройки реса делал согласно ваших рекомендаций на этом форуме.
сначала просканировал спутники 90 и 75гр, (антенну настраивал другим ресом),в меню настроек тюнера устанавливал :простой,позиционер и далее свои координаты,все делал как написано,но результатов нет.При просмотре каналов на Ямале,хочу перейти на ABS,кликаешь
канал из списка этого спутника,на экране появляется заставка с мерцающей антенной и надпись из90 в75,но перехода нет,как на других ресах.Заходил и в "Настройки позицио-
нера" но и это не помогло.Может нужна другая прошивка для этого реса, В одной из менюшек на строке Позиционер стояли значения:прошит,не прошит.А вот по поводу видеоинструкции и кучи слов и картинок,текстовую пошаговую инструкцию можно распечатать и спокойно у ресивера ее внедрять,не у всех компьютер и телевизор совмещены.Спасибо.
User avatar
Nikoc49
Linux User
 
Posts: 15
Joined: 26 Jul 2013, 14:24
Receiver: Sezam 1000HD

by Debian » 31 Jul 2013, 15:05

Вы скорее всего неправильно что-то делаете.
Для каждого спутника на дисеке или моторе должна быть свой номер LNB.
Image

в этом меню надо спустится вниз и вам откроется следующее меню

Image

Вам по Usals надо ввести свои координаты города для широты и долготы.

Для позиционера, в меню надо нажать красную кнопку (Настроить)

Image
User avatar
Debian
Admin
 
Posts: 2176
Joined: 14 Feb 2013, 04:53
Receiver: Sezam
Image: EGAMI
Skype: esc.shell

by Nikoc49 » 02 Aug 2013, 15:48

Настроил свой мото подвес на все спутники таким образом;конфигурация тюнера-простой,позиционер и координаты,настройка позиционера,поиск спутника и ОК,Все работает
четко.Спасибо за помощь. А теперь появилась очередная прблема-никак не могу сделать FTP соединение через T.comandor. Итернет в р-р с интернет - центра KEENETIC 4G,Проверял по плагину погода-открывается,но FTP соединения
нет.Вот данные с роутера; ip адрес;192.168.1.33
маска подсети;255.255.255.0
Шлюз;192.168.1.255
МАС;00:00:DE:AD:BE:EF
Подскажите,где ошибка.Спасибо.
User avatar
Nikoc49
Linux User
 
Posts: 15
Joined: 26 Jul 2013, 14:24
Receiver: Sezam 1000HD

by Debian » 02 Aug 2013, 16:00

На форуме уже есть тема про подключение к ресиверу с помощью TC в разделе HowTo, ссылка на тему.
User avatar
Debian
Admin
 
Posts: 2176
Joined: 14 Feb 2013, 04:53
Receiver: Sezam
Image: EGAMI
Skype: esc.shell

by Nikoc49 » 02 Aug 2013, 16:19

на примере этой ссылки и других сайтов, я и пытался сделать подключение,но ответ один:
не удалось соединится.
User avatar
Nikoc49
Linux User
 
Posts: 15
Joined: 26 Jul 2013, 14:24
Receiver: Sezam 1000HD

by dima_m » 02 Aug 2013, 17:20

Вы через интернет что-ли пытаетесь на ресивер зайти?
Тогда в роутере 21 порт пробросить надо на ресивер.
Если я не правильно понял, распишите подробно как у Вас организована сеть.
User avatar
dima_m
Moderator
 
Posts: 98
Joined: 15 Feb 2013, 16:14
Receiver: Sezam 1000HD
Image: Egami

by Debian » 02 Aug 2013, 18:02

А что у вас в настройках роутера и какая у него прошивка, как вариант попробуйте зайди на ресивер с помощью FileZilla.
User avatar
Debian
Admin
 
Posts: 2176
Joined: 14 Feb 2013, 04:53
Receiver: Sezam
Image: EGAMI
Skype: esc.shell

by Nikoc49 » 03 Aug 2013, 07:14

таже самая картина и с FileZilla-нет соединения
User avatar
Nikoc49
Linux User
 
Posts: 15
Joined: 26 Jul 2013, 14:24
Receiver: Sezam 1000HD

by новый » 03 Aug 2013, 10:41

Nikoc49 wrote:Настроил свой мото подвес на все спутники таким образом;конфигурация тюнера-простой,позиционер и координаты,настройка позиционера,поиск спутника и ОК,Все работает
четко.Спасибо за помощь. А теперь появилась очередная прблема-никак не могу сделать FTP соединение через T.comandor. Итернет в р-р с интернет - центра KEENETIC 4G,Проверял по плагину погода-открывается,но FTP соединения
нет.Вот данные с роутера; ip адрес;192.168.1.33
маска подсети;255.255.255.0
Шлюз;192.168.1.255
МАС;00:00:DE:AD:BE:EF
Подскажите,где ошибка.Спасибо.

А напишите IP адрес,маску и т.д. ресивера,посмотрим что дальше делать.А вообще в асю нужно стукнуть,постораюсь помочь.
Octagon SF4008 UHD 4K,MEMOBOX KII-UHD 4K,Sezam Marvel,Openbox s4pro+

(PKTeam)блюдо:0,6 ш@р@ VIP ALL.

ZARGACUM.NET - cardsharing СЕРВЕР за5,6$VIP ALL .Интер. шаринг+Поз. шаринг+Спутн. шаринг+IPTV
Для открытия ссылки необходимо скачать плагин friGate в вашем браузере.
User avatar
новый
Moderator
 
Posts: 256
Joined: 14 Feb 2013, 22:19
Location: ЮФО-161rus.
Receiver: Octagon 4008,Marvel
Image: Egami & OpenPLI
Skype: novii-061

by Debian » 03 Aug 2013, 15:25

Вы на сам роутер по вебу зайти то хоть можете?
Можете ли зайти на ресивер по веб интерфейсу?
User avatar
Debian
Admin
 
Posts: 2176
Joined: 14 Feb 2013, 04:53
Receiver: Sezam
Image: EGAMI
Skype: esc.shell

by Nikoc49 » 08 Aug 2013, 15:56

Все!С тотал сомандор проблема разрешилась.Просто нужно было создать единую сеть :keenetik zyxel-ресивер-компьютер и установить автоматическое определение IP на лок.сети.
User avatar
Nikoc49
Linux User
 
Posts: 15
Joined: 26 Jul 2013, 14:24
Receiver: Sezam 1000HD

by gobzdik » 05 Jun 2014, 14:35

Всем привет.
Помогите, пожалуйста, с настройкой Wi-Fi на Marvel.
Подключается к сети без проблем, сеть WPA2, а "состоянии беспроводной сети" шифрование "не поддерживается".
Что не так делаю :blush:
User avatar
gobzdik
Linux User
 
Posts: 77
Joined: 30 May 2014, 14:30
Location: Санкт-Петербург
Receiver: Sezam Marvel

by Debian » 05 Jun 2014, 14:47

Попробуйте поставить шифрование Wpa или Wpa2, потом ваш пароль.
Есть отдельная тема по Wi Fi, лучше подобные вопросы там задавать.
User avatar
Debian
Admin
 
Posts: 2176
Joined: 14 Feb 2013, 04:53
Receiver: Sezam
Image: EGAMI
Skype: esc.shell

by gobzdik » 05 Jun 2014, 14:58

Debian, приветствую Вас.
Всё заработало.
Я дурень, надо темы искать правильно...и читать...читать...читать.
СПАСИБО ещё раз.
Да здравствует вся команда EGAMI :-)
User avatar
gobzdik
Linux User
 
Posts: 77
Joined: 30 May 2014, 14:30
Location: Санкт-Петербург
Receiver: Sezam Marvel

by SergeyA » 10 Aug 2016, 00:17

vladimir451963 wrote: Скорее всего здесь собака зарыта потому что на распознает разрешение которое нужно выдавать на телевизор т.к в инфо панели разрешение отображается 655557х 4578, изображение и звук отсутствует через какое то время 5-7 минут если включается канал то исчезает сигнал, это надо решать покупкой нового телека 6-8 поколения. В начале настроек Sezam 5000hd находит все каналы в количестве 248 включая радио и сигнал отличный


я вам почти на это и намекал :) такое разрешение выдается когда не может модуль декодировать сигнал, такое же разрешение выдается и при работе через эмулятор у меня, когда по какой либо причине нет возможности декодирования, а вы все грешите на телек :)
далее с ваших же слов про количество каналов и их уровень сигнала, чтоб исключить модуль все просто, становитесь на любой канал желательно HD при этом вынув модуль и ждете 5-7 мин. за которое время у вас пропадал сигнал, смотреть на малевич не обязательно, и если произойдет тоже самое то модуль тут не причем а если с сигналом ничего не случится то соотвественно проблема в модуле, но как по мне вот это вот "уровень 51/качество 85-90" маловато будет, но утверждать не возьмусь, так как как и писал выше ради интереса с чужой тарелкой игрался только с 85 градусом и там у меня явно были уровни выше, про мой же постоянный просмотр 36 градуса сказать могу что у меня обе шкалы 99, за редким исключением некоторых частот, и в данный момент опять вот за окном облачность поперла, по сигнал файндеру AGG 99 SNR 83-85 (13.4-13.6 db) обычно тоже в районе 90-94% это один из транспондеров для примера который не 99
User avatar
SergeyA
Linux User
 
Posts: 183
Joined: 13 Apr 2013, 06:29
Receiver: AX 4K HD51/SEZAM
Image: OpenATV/OpenPli

by vladimir451963 » 10 Aug 2016, 21:26

на Skyway Droid уровень сигнала был 75, скорое всего эта особенность ресса. А это лог Sezam 5000 hd посмотрите может я что не так делаю. Заранее благодарен

Code: Select all
BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq:      396MHz
CPU speed:     405MHz
Memory Config: 64-bit UMA
Device Tech:   1Gb
Total memory:  512MB
Boot Device:   NOR
Total flash:   4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

CFE initialized.

[FLASH-TOOL] Searching update files...

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files...

Booting...
Starting splash screen.
***************************************************
Found splash image - Width = 720 Height = 576
***************************************************


Executing STARTUP...
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader... found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
         sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
  Normal   [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
  node   0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
Kernel command line:  bmem=216M ubi.mtd=rootfs root=ub:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.497 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
------------[ cut here ]------------
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[<80638350>] dump_stack+0x8/0x34
[<80025a9c>] warn_slowpath_common+0x78/0xa4
[<80025b4c>] warn_slowpath_null+0x18/0x24
[<807c858c>] start_secondary+0x444/0x48c
[<807c638c>] brcmstb_tp1_reentry+0x0/0x34

---[ end trace 4eaa2a86a8e2da22 ]---
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
PCI2.3->SDRAM window: 512 MB
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: root bus resource [io  0x0400-0x83ff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
pci_bus 0000:01: root bus resource [io  0x8400-0x87ff]
pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource upg
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.20)
msgmni has been set to 567
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
loop: module loaded
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
scsi0 : sata_brcmstb
scsi1 : sata_brcmstb
ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
Broadcom STB NAND controller (BrcmNand Controller)
bcmemac: Broadcom STB 10/100 EMAC driver v3.0
bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:1e:a0:00:01:a1)
bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
a1.00: ATA-8: WDC WD5000BPVT-24HXZT3, 03.01A03, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ata1.00: configured for UDMA/133
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
EBI CS1: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
DevId ecdc1095 may not be supported.  Will use config info
Spare Area Size = 16B/512B
Block size=00020000, erase shift=17
NAND Config: Reg=17152300, chipSize=512 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
timing1 not adjusted: 5363444f
timing2 not adjusted: 00000fc6
ECC level changed to 15
OOB size changed to 16
BrcmNAND mfg 0 0 UNSUPPORTED NAND CHIP 512MB on CS1

Found NAND on CS1: ACC=d7ff1010, cfg=17152300, flashId=ecdc1095, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 512MB @00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Adjust partition complete size from entire device to 1ff00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 1f900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x00001ff00000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x00001ff00000 : "rootfs"
EBI CS0: setting up NOR flash
physmap platform flash device: 04000000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-2 03.0 PQ: 0 ANSI: 5
Creating 6 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000080000 : "cfe"
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
0x000000080000-0x000000280000 : "splash"
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
0x000000280000-0x000000300000 : "macadr"
0x000000300000-0x000000380000 : "nvram"
0x000000380000-0x0000003c0000 : "bootconfig"
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
0x0000003c0000-0x000000400000 : "facconfig"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number:       563
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "rootfs"
UBI: MTD device size:            505 MiB
UBI: number of good PEBs:        4040
UBI: number of bad PEBs:         0
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 4040
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 2/0
UBI: image sequence number:  225808210
UBI: background thread "ubi_bgt0d" started, PID 64
ALSA device list:
  No soundcards found.
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size:   500920320 bytes (489180 KiB, 477 MiB, 3945 LEBs)
UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 248k freed

INIT: version 2.88 booting

mkdir: can't create directory '/tmp': No such file or directory
mkdir: can't create directory '/tmp': No such file or directory
find: /media/hdd: No such file or directory
rmdir: '/media/hdd': No such file or directory
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
[platform_i2c_mutex_init] ...
fb0: brcmfb frame buffer device
{135}[MCU] ver : 2.00.25
{135}[MCU] model : RHS500R
{135}[MCU] power : SWITCH
input: dreambox front panel as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[stv6418_init] MACHINE_INI7000
[stv6418_init] MACHINE_INI5000
DVB: registering new adapter (dvb)
DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)...
DVB: registering adapter 0 frontend 0 (DVB-T/T2 NIM)...
SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
mkdir: can't create directory '/tmp': No such file or directory
mkdir: can't create directory '/tmp': No such file or directory
ALSA: Restoring mixer settings...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
/usr/sbin/alsactl: load_state:1735: No soundcards found...

INIT: Entering runlevel: 3

Configuring network interfaces... bcmemac: eth0 NIC Link is Down
udhcpc (v1.24.1) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
done.
Starting system message bus: NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
dbus.
Starting Dropbear SSH server: dropbear.
Starting automount: automount: program is already running.
done.
Starting rpcbind daemon...done.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems...
creating NFS state directory: done
starting statd: done
starting Busybox Periodic Command Scheduler: crond... done.
crond[462]: crond (busybox 1.24.1) started, log level 8


* starting UPnP client: djmount... done.
[SCRIPT] start: Common Interface
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
 * Starting uShare UPnP A/V & DLNA Media Server: ushare
   ...done.
* starting FTP Server: vsftpd... done.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS...
[EGAMI] Sezam

enigma2 is the main pvr application... adjust oom score!
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
[MAIN] executing main
{545}[video_videomodepreferred_read] mode(0) not found!!!
{545}[video_videomodepreferred_read] mode(0) not found!!!
{545}[video_videomodepreferred_read] mode(0) not found!!!
{545}[video_videomodepreferred_read] mode(0) not found!!!
{545}[video_videomodepreferred_read] mode(0) not found!!!
{545}[video_videomodepreferred_read] mode(0) not found!!!


BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq:      396MHz
CPU speed:     405MHz
Memory Config: 64-bit UMA
Device Tech:   1Gb
Total memory:  512MB
Boot Device:   NOR
Total flash:   4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

CFE initialized.

[FLASH-TOOL] Searching update files...

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files...

Booting...
Starting splash screen.
***************************************************
Found splash image - Width = 720 Height = 576
***************************************************


Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader... found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
         sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
  Normal   [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
  node   0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
Kernel command line:  bmem=216M ubi.mtd=rootfs root=ub:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.497 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
------------[ cut here ]------------
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[<80638350>] dump_stack+0x8/0x34
[<80025a9c>] warn_slowpath_common+0x78/0xa4
[<80025b4c>] warn_slowpath_null+0x18/0x24
[<807c858c>] start_secondary+0x444/0x48c
[<807c638c>] brcmstb_tp1_reentry+0x0/0x34

---[ end trace 4eaa2a86a8e2da22 ]---
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
PCI2.3->SDRAM window: 512 MB
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: root bus resource [io  0x0400-0x83ff]
pci_bus 0000:00: No busn resource found for
User avatar
vladimir451963
Linux User
 
Posts: 30
Joined: 04 Jul 2016, 17:38
Receiver: Sezam 5000HD
Skype: vladimir451963

by SergeyA » 10 Aug 2016, 22:55

в момент снятия лога модуль был вставлен?
нет ну я конечно все понимаю, расставаться с тем что верой и правдой служило продолжительное время тяжко, сам такой :) да плюс у меня ситуация другая, мне мой модуль сувать некуда кроме телека :) но наберитесь храбрости и подождите 5-7 минут с модулем и без, это то время с ваших слов за которое пропадает сигнал и будет ясно модуль тут или что. почему я про модуль спрашиваю в начале поста, мне не понравиль строчки в конце лога загрузки, это и есть потеря видеоразрешения, при том что в начале все нормально выставляется.
User avatar
SergeyA
Linux User
 
Posts: 183
Joined: 13 Apr 2013, 06:29
Receiver: AX 4K HD51/SEZAM
Image: OpenATV/OpenPli

by vladimir451963 » 11 Aug 2016, 00:34

Code: Select all
BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq:      396MHz
CPU speed:     405MHz
Memory Config: 64-bit UMA
Device Tech:   1Gb
Total memory:  512MB
Boot Device:   NOR
Total flash:   4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

CFE initialized.

[FLASH-TOOL] Searching update files...

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files...

Booting...
Starting splash screen.
***************************************************
Found splash image - Width = 720 Height = 576
***************************************************


Executing STARTUP...
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader... found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
         sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
  Normal   [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
  node   0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
Kernel command line:  bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.499 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
------------[ cut here ]------------
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[<80638350>] dump_stack+0x8/0x34
[<80025a9c>] warn_slowpath_common+0x78/0xa4
[<80025b4c>] warn_slowpath_null+0x18/0x24
[<807c858c>] start_secondary+0x444/0x48c
[<807c638c>] brcmstb_tp1_reentry+0x0/0x34

---[ end trace 4eaa2a86a8e2da22 ]---
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
PCI2.3->SDRAM window: 512 MB
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: root bus resource [io  0x0400-0x83ff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
pci_bus 0000:01: root bus resource [io  0x8400-0x87ff]
pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource upg
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.20)
msgmni has been set to 567
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
loop: module loaded
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
scsi0 : sata_brcmstb
scsi1 : sata_brcmstb
ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
Broadcom STB NAND controller (BrcmNand Controller)
bcmemac: Broadcom STB 10/100 EMAC driver v3.0
bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:1e:a0:00:01:a1)
bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
ata1.00: ATA-8: WDC WD5000BPVT-24HXZT3, 03.01A03, max UDMA/133
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
TCP: cubic registered
NET: Registered protocol family 17
ata1.00: configured for UDMA/133
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
EBI CS1: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
DevIecdc1095 may not be supported.  Will use config info
Spare Area Size = 16B/512B
Block size=00020000, erase shift=17
NAND Config: Reg=17152300, chipSize=512 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
timing1 not adjusted: 5363444f
timing2 not adjusted: 00000fc6
ECC level changed to 15
OOB size changed to 16
BrcmNAND mfg 0 0 UNSUPPORTED NAND CHIP 512MB on CS1

Found NAND on CS1: ACC=d7ff1010, cfg=17152300, flashId=ecdc1095, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 512MB @00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Adjust partition complete size from entire device to 1ff00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 1f900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x00001ff00000 : "complete"
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-2 03.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x00001ff00000 : "rootfs"
EBI CS0: setting up NOR flash
physmap platform flash device: 04000000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 6 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000080000 : "cfe"
0x000000080000-0x000000280000 : "splash"
0x000000280000-0x000000300000 : "macadr"
0x000000300000-0x000000380000 : "nvram"
0x000000380000-0x0000003c0000 : "bootconfig"
0x0000003c0000-0x000000400000 : "facconfig"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
sd 0:0:0:0: [sda] Attached SCSI disk
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number:       575
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "rootfs"
UBI: MTD device size:            505 MiB
UBI: number of good PEBs:        4040
UBI: number of bad PEBs:         0
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 4040
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 2/0
UBI: image sequence number:  225808210
ALSA device list:
  No soundcards found.
UBI: background thread "ubi_bgt0d" started, PID 64
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size:   500920320 bytes (489180 KiB, 477 MiB, 3945 LEBs)
UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 248k freed

INIT: version 2.88 booting

mkdir: can't create directory '/tmp': No such file or directory
mkdir: can't create directory '/tmp': No such file or directory
find: /media/hdd: No such file or directory
rmdir: '/media/hdd': No such file or directory
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
[platform_i2c_mutex_init] ...
fb0: brcmfb frame buffer device
{135}[MCU] ver : 2.00.25
{135}[MCU] model : RHS500R
{135}[MCU] power : SWITCH
input: dreambox front panel as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[stv6418_init] MACHINE_INI7000
[stv6418_init] MACHINE_INI5000
DVB: registering new adapter (dvb)
DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)...
DVB: registering adapter 0 frontend 0 (DVB-T/T2 NIM)...
SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
mkdir: can't create directory '/tmp': No such file or directory
mkdir: can't create directory '/tmp': No such file or directory
ALSA: Restoring mixer settings...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
/usr/sbin/alsactl: load_state:1735: No soundcards found...

INIT: Entering runlevel: 3

Configuring network interfaces... bcmemac: eth0 NIC Link is Down
udhcpc (v1.24.1) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
done.
Starting system message bus: NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
dbus.
Starting Dropbear SSH server: dropbear.
Starting automount: automount: program is already running.
done.
Starting rpcbind daemon...done.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems...
creating NFS state directory: done
starting statd: done
starting Busybox Periodic Command Scheduler: crond... done.
* starting UPnP client: djmount... crond[462]: crond (busybox 1.24.1) started, log level 8


done.
[SCRIPT] start: Common Interface
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
 * Starting uShare UPnP A/V & DLNA Media Server: ushare
   ...done.
* starting FTP Server: vsftpd... done.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS...
[EGAMI] Sezam

enigma2 is the main pvr application... adjust oom score!
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
[MAIN] executing main
{545}[video_videomodepreferred_read] mode(0) not found!!!
{545}[video_videomodepreferred_read] mode(0) not found!!!
{545}[video_videomodepreferred_read] mode(0) not found!!!
{545}[video_videomodepreferred_read] mode(0) not found!!!
{545}[video_videomodepreferred_read] mode(0) not found!!!
{545}[video_videomodepreferred_read] mode(0) not found!!!

Сейчас сделаю с модулем, но пробовал сбрасывать на заводские настройки потом заново выставлял спутник без модуля и проверял сигнал без модуля не сканируя такая же песня 5 минут держит, а потом опять падение сигнала на трех транспондерах.
User avatar
vladimir451963
Linux User
 
Posts: 30
Joined: 04 Jul 2016, 17:38
Receiver: Sezam 5000HD
Skype: vladimir451963

by SergeyA » 11 Aug 2016, 00:43

ну вы поймите момент, если бы что то было с тюнером, вы никогда не смогли отсканировать спутник, соответственно тут не может быть два момента с одним и тем же тюнером, как я понял из ваших логов он у вас один, соотвественно что то происходит именно за эти 5-7 минут, одно из двух либо у вас реально траблы с тюнером либо он банально каким то образом перегревается, но про свои я писал выше, за три года эксплуатации ничего с ними не случилось, при этом температура у них высокая, что у меня всегда вызывало недоумение что они сильнее греются в стенбае чем в работе. так же момент, а зачем проверять на не отсканированном спутнике? тогда если это реально так происходит лучше посетите сервисный центр, за 5-7 минут как у вас появляются проблемы с просмотром они уж факт либо определят неисправность тюнера либо подтвердят что дело в вашем антенном хозяйстве.
User avatar
SergeyA
Linux User
 
Posts: 183
Joined: 13 Apr 2013, 06:29
Receiver: AX 4K HD51/SEZAM
Image: OpenATV/OpenPli

by vladimir451963 » 11 Aug 2016, 00:53

Да еще один вопрос при снятии лога ресивер должен быть подключен к спутнику и телевизору или это не обязательно. Сервисных центров по сезаму у нас нет и спецов найти одни проблемы так что сдать придется наверное ресс назад я так понимаю
User avatar
vladimir451963
Linux User
 
Posts: 30
Joined: 04 Jul 2016, 17:38
Receiver: Sezam 5000HD
Skype: vladimir451963

by vladimir451963 » 11 Aug 2016, 00:55

На другом ресивере HUmax 2000 hd все показывает нормально.
User avatar
vladimir451963
Linux User
 
Posts: 30
Joined: 04 Jul 2016, 17:38
Receiver: Sezam 5000HD
Skype: vladimir451963

by SergeyA » 11 Aug 2016, 01:02

да по тем логам которые вы предоставили, это без разницы, это логи просто загрузки реса. а вот для лога работы реса уже все должно быть подключено, потому как лог загрузки ни о чем не говорит, есть там конечно один моментик, но это лучше к Debian`у я не помню уже что пишет егами на 5000, а под рукой у меня его нет, да и с компортом у меня проблема, нет его у меня на компе давно, а переходник USB-COM куда то профукал. совсем нет никаких сервисов, хоть того же дилера трикала, обчно у них хоть что нибудь есть, если не велосипедисты конечно, всего то нужно посмотреть на ихнем антенном хозяйстве поведение.

ps ну если действительно так, в плане что хум работает при тех же условиях нормально то в сервис его однозначно. либо действительно что то с софтом наворотили, поставьте еще раз бекап Debian`а и ничего с ним не делайте, кроме настройки начальной как предложит мастер загрузки и сканирования спутника и посмотрите, ибо кое что мне лично не нравится в вашем логе загрузки, только действительно ничего к этому бекапу не добавляйте, и тогда уже принимайте решение в сервис его или как.
Last edited by SergeyA on 11 Aug 2016, 01:08, edited 1 time in total.
User avatar
SergeyA
Linux User
 
Posts: 183
Joined: 13 Apr 2013, 06:29
Receiver: AX 4K HD51/SEZAM
Image: OpenATV/OpenPli

by vladimir451963 » 11 Aug 2016, 01:04

Code: Select all
BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq:      396MHz
CPU speed:     405MHz
Memory Config: 64-bit UMA
Device Tech:   1Gb
Total memory:  512MB
Boot Device:   NOR
Total flash:   4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

CFE initialized.

[FLASH-TOOL] Searching update files...

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files...

Booting...
Starting splash screen.
***************************************************
Found splash image - Width = 720 Height = 576
***************************************************


Executing STARTUP...
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader... found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
         sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
  Normal   [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
  node   0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
Kernel command line:  bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (20 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 ytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
------------[ cut here ]------------
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[<80638350>] dump_stack+0x8/0x34
[<80025a9c>] warn_slowpath_common+0x78/0xa4
[<80025b4c>] warn_slowpath_null+0x18/0x24
[<807c858c>] start_secondary+0x444/0x48c
[<807c638c>] brcmstb_tp1_reentry+0x0/0x34

---[ end trace 4eaa2a86a8e2da22 ]---
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
PCI2.3->SDRAM window: 512 MB
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: root bus resource [io  0x0400-0x83ff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
pci_bus 0000:01: root bus resource [io  0x8400-0x87ff]
pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource upg
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.20)
msgmni has been set to 567
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
loop: module loaded
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
scsi0 : sata_brcmstb
scsi1 : sata_brcmstb
ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
Broadcom STB NAND controller (BrcmNand Controller)
bcmemac: Broadcom STB 10/100 EMAC driver v3.0
bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:1e:a0:00:01:a1)
bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
ata1.00: ATA-8: WDC WD5000BPVT-24HXZT3, 03.01A03, max UDMA/133
i2c /dev entries driver
usbcore: registered new interface driver btusb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ata1.00: configured for UDMA/133
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
EBI CS1: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
DevId ecdc1095 may not be supported.  Will use config info
Spare Area Size = 16B/512B
Block size=00020000, erase shift=17
NAND Config: Reg=17152300, chipSize=512 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
timing1 not adjusted: 5363444f
timing2 not adjusted: 00000fc6
ECC level changed to 15
OOB size changed to 16
BrcmNAND mfg 0 0 UNSUPPORTED NAND CHIP 512MB on CS1

Found NAND on CS1: ACC=d7ff1010, cfg=17152300, flashId=ecdc1095, tim1=5363444f, tim2=00000fc6
BrcmNAND versi = 0x0302 512MB @00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Adjust partition complete size from entire device to 1ff00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 1f900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x00001ff00000 : "complete"
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-2 03.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x00001ff00000 : "rootfs"
EBI CS0: setting up NOR flash
physmap platform flash device: 04000000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 6 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000080000 : "cfe"
0x000000080000-0x000000280000 : "splash"
0x000000280000-0x000000300000 : "macadr"
0x000000300000-0x000000380000 : "nvram"
0x000000380000-0x0000003c0000 : "bootconfig"
0x0000003c0000-0x000000400000 : "facconfig"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
sd 0:0:0:0: [sda] Attached SCSI disk
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number:       1403
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "rootfs"
UBI: MTD device size:            505 MiB
UBI: number of good PEBs:        4040
UBI: number of bad PEBs:         0
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 4040
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 2/1
UBI: image sequence number:  225808210
UBI: background thread "ubi_bgt0d" started, PID 64
ALSA device list:
  No soundcards found.
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size:   500920320 bytes (489180 KiB, 477 MiB, 3945 LEBs)
UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 248k freed

INIT: version 2.88 booting

mkdir: can't create directory '/tmp': No such file or directory
mkdir: can't create directory '/tmp': No such file or directory
find: /media/hdd: No such file or directory
rmdir: '/media/hdd': No such file or directory
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
[platform_i2c_mutex_init] ...
fb0: brcmfb frame buffer device
{134}[MCU] ver : 2.00.25
{134}[MCU] model : RHS500R
{134}[MCU] power : SWITCH
input: dreambox front panel as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[stv6418_init] MACHINE_INI7000
[stv6418_init] MACHINE_INI5000
DVB: registering new adapter (dvb)
DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)...
DVB: registering adapter 0 frontend 0 (DVB-T/T2 NIM)...
SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
mkdir: can't create directory '/tmp': No such file or directory
mkdir: can't create directory '/tmp': No such file or directory

 ci/caci_phys.c,966:ciPhys_CheckCIS() Result=0, dvb=0 IsAddrCor=1, IsCor=0

 ci/caci_phys.c,966:ciPhys_CheckCIS() Result=1, dvb=15 IsAddrCor=1, IsCor=1
ALSA: Restoring mixer settings...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
/usr/sbin/alsactl: load_state:1735: No soundcards found...

INIT: Entering runlevel: 3

Configuring network interfaces... bcmemac: eth0 NIC Link is Down
udhcpc (v1.24.1) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
done.
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Starting system message bus: Unknown username "avahi" in message bus configuration file
dbus.
Starting Dropbear SSH server: dropbear.
Starting automount: done.
Starting rpcbind daemon...done.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems...
creating NFS state directory: done
starting statd: done
starting Busybox Periodic Command Scheduler: crond... done.
crond[463]: crond (busybox 1.24.1) started, log level 8


* starting UPnP client: djmount... done.
[SCRIPT] start: Common Interface
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
* starting DLNA Server: minidlna... done.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
 * Starting uShare UPnP A/V & DLNA Media Server: ushare
   ...done.
* starting FTP Server: vsftpd... done.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
Timeout reached while wating for return value
Could not receive return value from daemon process.
   ...fail!
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS...
[EGAMI] Sezam

PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
enigma2 is the main pvr application... adjust oom score!
[MAIN] executing main

 ci/caci_phys.c,966:ciPhys_CheckCIS() Result=0, dvb=0 IsAddrCor=1, IsCor=0

 ci/caci_phys.c,966:ciPhys_CheckCIS() Result=1, dvb=15 IsAddrCor=1, IsCor=1
{572}
 CI Negotiated buffer size is 255 bytes
{565}[video_videomodepreferred_read] mode(0) not found!!!
{565}[video_videomodepreferred_read] mode(0) not found!!!
{565}[video_videomodepreferred_read] mode(0) not found!!!
{565}[video_videomodepreferred_read] mode(0) not found!!!
{565}[video_videomodepreferred_read] mode(0) not found!!!
{565}[video_videomodepreferred_read] mode(0) not found!!!
{565}[ci_read] buffer empty
{565}[ci_read] buffer empty

 ci/caci_phys.c,966:ciPhys_CheckCIS() Result=0, dvb=0 IsAddrCor=1, IsCor=0

 ci/caci_phys.c,966:ciPhys_CheckCIS() Result=1, dvb=15 IsAddrCor=1, IsCor=1
{572}
 CI Negotiated buffer size is 255 bytes
{620}[XportConnectionThread] (1) RCV res = 5 (== 5) (xport_rcv_timeout = 7000)
{620}[XportConnectionThread] transport rcv data timedout!!!

 ci/caci_phys.c,966:ciPhys_CheckCIS() Result=0, dvb=0 IsAddrCor=1, IsCor=0

 ci/caci_phys.c,966:ciPhys_CheckCIS() Result=1, dvb=15 IsAddrCor=1, IsCor=1
{572}
 CI Negotiated buffer size is 255 bytes

Да и почему падение сигнала только на трех транспондерах, если была проблема с тюнером то он бы вообще не ловил ни один тран. И на разных прошивках падение сигнала на разных транспондерах.
User avatar
vladimir451963
Linux User
 
Posts: 30
Joined: 04 Jul 2016, 17:38
Receiver: Sezam 5000HD
Skype: vladimir451963

by SergeyA » 11 Aug 2016, 01:20

сейчас по моему Debian нам что то сделает :blush2: прячте под спойлер логи, да и этого лога достаточно одного, потому как это лог загрузки реса но ни как не обображает его работу.
что касается "Да и почему падение сигнала только на трех транспондерах, если была проблема с тюнером то он бы вообще не ловил ни один тран. И на разных прошивках падение сигнала на разных транспондерах." я вам изначально твержу что по мне это проблема либо модуля либо с антенным хозяйством что то не так. по модулям этим были проблемы и именно почти такая же плавающая фигня, когда не понятно в чем проблема, писалось на других форумах не однократно, в том числе на телеспутнике. я бы вот лично изза некоторых проблем, вернее кое каких моментиков, в настоящее время вообще не стал брать эти ресы для оффпросмотра, Debian знает по моим постам мое некоторое недовольство, во всем остальном снова повторюсь нет проблем с этими ресами. и в какой то мере для просто просмотра телевидения мне больше нравиться 5000 чем марвел. всего много, а гимора больше :)

ps. и еще одно, коль уж нет другого антенного хозяйства, и чтоб исключить влияние модуля, на прямую писать не буду, посмотрите на подписи модераторов форума, у них там есть сервисы некоторые, например заргакум, зайдите возьмите на тест своей спутник и проверьте как будет работать, пару часов по любому хватит, настройки эмулятора возьмете там же, вот и вся в этом случае будет проверка :)
User avatar
SergeyA
Linux User
 
Posts: 183
Joined: 13 Apr 2013, 06:29
Receiver: AX 4K HD51/SEZAM
Image: OpenATV/OpenPli

by Debian » 11 Aug 2016, 17:21

Точно лог загрузки не особо нужен, нужен лог, когда именно происходит фриз.
User avatar
Debian
Admin
 
Posts: 2176
Joined: 14 Feb 2013, 04:53
Receiver: Sezam
Image: EGAMI
Skype: esc.shell

by vladimir451963 » 13 Aug 2016, 21:50

Code: Select all
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.08.13 16:43:43 =~=~=~=~=~=~=~=~=~=~=~=
 

BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq:      396MHz
CPU speed:     405MHz
Memory Config: 64-bit UMA
Device Tech:   1Gb
Total memory:  512MB
Boot Device:   NOR
Total flash:   4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

CFE initialized.

[FLASH-TOOL] Searching update files...

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files...

Booting...
Starting splash screen.
***************************************************
Found splash image - Width = 720 Height = 576
***************************************************


Executing STARTUP...
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader... found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
         sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
  Normal   [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
  node   0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Buit 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
Kernel command line:  bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.497 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
------------[ cut here ]------------
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[<80638350>] dump_stack+0x8/0x34
[<80025a9c>] warn_slowpath_common+0x78/0xa4
[<80025b4c>] warn_slowpath_null+0x18/0x24
[<807c858c>] start_secondary+0x444/0x48c
[<807c638c>] brcmstb_tp1_reentry+0x0/0x34

---[ end trace 4eaa2a86a8e2da22 ]---
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
PCI2.3->SDRAM window: 512 MB
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: root bus resource [io  0x0400-0x83ff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
pci_bus 0000:01: root bus resource [io  0x8400-0x87ff]
pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource upg
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.20)
msgmni has been set to 567
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
loop: module loaded
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
scsi0 : sata_brcmstb
scsi1 : sata_brcmstb
ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
Broadcom STB NAND controller (BrcmNand Controller)
bcmemac: Broadcom STB 10/100 EMAC driver v3.0
bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:1e:a0:00:01:a1)
bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
ata1: SATA link down (SStatus 4 SControl 300)
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
EBI CS1: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
DevId ecdc1095 may not be supported.  Will use config info
Spare Area Size = 16B/512B
Block size=00020000, erase shift=17
NAND Config: Reg=17152300, chipSize=512 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
timing1 not adjusted: 5363444f
timing2 not adjusted: 00000fc6
ECC level changed to 15
OOB size changed to 16
BrcmNAND mfg 0 0 UNSUPORTED NAND CHIP 512MB on CS1

Found NAND on CS1: ACC=d7ff1010, cfg=17152300, flashId=ecdc1095, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 512MB @00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Adjust partition complete size from entire device to 1ff00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 1f900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x00001ff00000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x00001ff00000 : "rootfs"
EBI CS0: setting up NOR flash
physmap platform flash device: 04000000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 6 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000080000 : "cfe"
0x000000080000-0x000000280000 : "splash"
0x000000280000-0x000000300000 : "macadr"
0x000000300000-0x000000380000 : "nvram"
0x000000380000-0x0000003c0000 : "bootconfig"
0x0000003c0000-0x000000400000 : "facconfig"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number:       1886
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "rootfs"
UBI: MTD device size:            505 MiB
UBI: number of good PEBs:        4040
UBI: number of bad PEBs:         0
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 4040
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 3/1
UBI: image sequence number:  225808210
UBI: background thread "ubi_bgt0d" started, PID 62
ALSA device list:
  No soundcards found.
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size:   500920320 bytes (489180 KiB, 477 MiB, 3945 LEBs)
UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 248k freed

INIT: version 2.88 booting

dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
[platform_i2c_mutex_init] ...
fb0: brcmfb frame buffer device
{97}[MCU] ver : 2.00.25
{97}[MCU] model : RHS500R
{97}[MCU] power : SWITCH
input: dreambox front panel as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[stv6418_init] MACHINE_INI7000
[stv6418_init] MACHINE_INI5000
DVB: registering new adapter (dvb)
DVB: registering adapter 0 frontend 0 (DVB-T/T2 NIM)...
DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)...
SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
ALSA: Restoring mixer settings...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
/usr/sbin/alsactl: load_state:1735: No soundcards found...

INIT: Entering runlevel: 3

Configuring network interfaces... bcmemac: eth0 NIC Link is Down
udhcpc (v1.24.1) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
done.
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Starting system message bus: Unknown username "avahi" in message bus configuration file
dbus.
Starting Dropbear SSH server: dropbear.
Starting automount: done.
Starting rpcbind daemon...done.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems...
creating NFS state directory: done
starting statd: done
starting Busybox Periodic Command Scheduler: crond... done.
crond[406]: crond (busybox 1.24.1) started, log level 8


* starting UPnP client: djmount... done.
[SCRIPT] start: Common Interface
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
* starting DLNA Server: minidlna... done.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
 * Starting uShare UPnP A/V & DLNA Media Server: ushare
   ...done.
* starting FTP Server: vsftpd... done.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
Timeout reached while wating for return value
Could not receive return value from daemon process.
   ...fail!
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS...
[EGAMI] Sezam

PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
enigma2 is the main pvr application... adjust oom score!
[MAIN] executing main
{509}[video_videomodepreferred_read] mode(0) not found!!!
{509}[video_videomodepreferred_read] mode(0) not found!!!
{509}[video_videomodepreferred_read] mode(0) not found!!!
{509}[video_videomodepreferred_read] mode(0) not found!!!
{509}[video_videomodepreferred_read] mode(0) not found!!!
{509}[video_videomodepreferred_read] mode(0) not found!!!
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 3f6
TuxTxt running thread...(3f6)
TuxTxt stopped service 3f6
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
bcmemac: eth0 NIC Link is Up 100 Mbps Full Duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{509}[video_policy2_write] policy(scale) not found
{509}[video_policy2_write] policy(scale) not found
{509}[video_aspect_write] aspect(16:10) not found!!!!
{509}[video_aspect_write] aspect(auto) not found!!!!
cleaning up
TuxTxt cache cleared
net.ipv4.conf.default.rp_filter = 1
netpv4.conf.all.rp_fr = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS...
[EGAMI] Sezam

PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
[MAIN] executing main
enigma2 is the main pvr application... adjust oom score!
{2071}[video_videomodepreferred_read] mode(0) not found!!!
{2071}[video_aspect_write] aspect(auto) not found!!!!
{2071}[video_policy2_write] policy(scale) not found
{2071}[video_videomodepreferred_read] mode(0) not found!!!
{2071}[video_videomodepreferred_read] mode(0) not found!!!
{2071}[video_videomodepreferred_read] mode(0) not found!!!
{2071}[video_videomodepreferred_read] mode(0) not found!!!
{2071}[video_videomodepreferred_read] mode(0) not found!!!
TuxTxt cache cleared
{2071}[video_aspect_write] aspect(auto) not found!!!!
{2071}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{2071}[video_aspect_write] aspect(auto) not found!!!!
{2071}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{2071}[video_aspect_write] aspect(auto) not found!!!!
{2071}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{2071}[video_aspect_write] aspect(auto) not found!!!!
{2071}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{2071}[video_aspect_write] aspect(auto) not found!!!!
{2071}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{2071}[video_aspect_write] aspect(auto) not found!!!!
{2071}[video_policy2_write] policy(scale) not found
{2071}[video_aspect_write] aspect(auto) not found!!!!
{2071}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{2071}[video_aspect_write] aspect(auto) not found!!!!
{2071}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{2071}[video_aspect_write] aspect(auto) not found!!!!
{2071}[video_policy2_write] policy(scale) not found
   

BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq:      396MHz
CPU speed:     405MHz
Memory Config: 64-bit UMA
Device Tech:   1Gb
Total memory:  512MB
Boot Device:   NOR
Total flash:   4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

CFE initialized.

[FLASH-TOOL] Searching update files...

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files...

Booting...
Starting splash screen.
***************************************************
Found splash image - Width = 720 Height = 576
***************************************************


Executing STARTUP...
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/826я 

BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq:      396MHz
CPU speed:     405MHz
Memory Config: 64-bit UMA
ce Tech:   1Gb
Total memory:  512MB
Boot Device:   NOR
Total flash:   4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

CFE initialized.

[FLASH-TOOL] Searching update files...

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files...

Booting...
Starting splash screen.
***************************************************
Found splash image - Width = 720 Height = 576
***************************************************


Executing STARTUP...
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader... found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
         sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
  Normal   [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
  node   0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
Kernel command line:  bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.498 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
------------[ cut here ]------------
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[<80638350>] dump_stack+0x8/0x34
[<80025a9c>] warn_slowpath_common+0x78/0xa4
[<80025b4c>] warn_slowpath_null+0x18/0x24
[<807c858c>] start_secondary+0x444/0x48c
[<807c638c>] brcmstb_tp1_reentry+0x0/0x34

---[ end trace 4eaa2a86a8e2da22 ]---
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
PCI2.3->SDRAM window: 512 MB
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: root bus resource [io  0x0400-0x83ff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
pci_bus 0000:01: root bus resource [io  0x8400-0x87ff]
pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource upg
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.20)
msgmni has been set to 567
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
loop: module loaded
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
scsi0 : sata_brcmstb
scsi1 : sata_brcmstb
ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
Broadcom STB NAND controller (BrcmNand Controller)
bcmemac: Broadcom STB 10/100 EMAC driver v3.0
bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:1e:a0:00:01:a1)
bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
ata1: SATA link down (SStatus 4 SControl 300)
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
EBI CS1: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
DevId ecdc1095 may not be supported.  Will use config info
Spare Area Size = 16B/512B
Block size=00020000, erase shift=17
NAND Config: Reg=17152300, chipSize=512 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
timing1 not adjusted: 5363444f
timing2 not adjusted: 00000fc6
ECC level changed to 15
OOB size changed to 16
BrcmNAND mfg 0 0 UNSUPPORTED NAND CHIP 512MB on CS1

Found NAND on CS1: ACC=d7ff1010, cfg=17152300, flashId=ecdc1095, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 512MB @00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Adjust partition complete size from entire device to 1ff00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 1f900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x00001ff00000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x00001ff00000 : "rootfs"
EBI CS0: setting up NOR flash
physmap platform flash device: 04000000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 6 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000080000 : "cfe"
0x000000080000-0x000000280000 : "splash"
0x000000280000-0x000000300000 : "macadr"
0x000000300000-0x000000380000 : "nvram"
0x000000380000-0x0000003c0000 : "bootconfig"
0x0000003c0000-0x000000400000 : "facconfig"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number:       1930
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "rootfs"
UBI: MTD device size:            505 MiB
UBI: number of good PEBs:        4040
UBI: number of bad PEBs:         0
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 4040
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 3/1
UBI: image sequence number:  225808210
ALSA device list:
UBI: backgrnd thread "ubi_bgt0d" started, PID 62
  No soundcards found.
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size:   500920320 bytes (489180 KiB, 477 MiB, 3945 LEBs)
UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 248k freed

INIT: version 2.88 booting

dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
[platform_i2c_mutex_init] ...
fb0: brcmfb frame buffer device
{97}[MCU] ver : 2.00.25
{97}[MCU] model : RHS500R
{97}[MCU] power : SWITCH
input: dreambox front panel as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[stv6418_init] MACHINE_INI7000
[stv6418_init] MACHINE_INI5000
DVB: registering new adapter (dvb)
DVB: registering adapter 0 frontend 0 (DVB-T/T2 NIM)...
DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)...
SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
ALSA: Restoring mixer settings...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
/usr/sbin/alsactl: load_state:1735: No soundcards found...

INIT: Entering runlevel: 3

Configuring network interfaces... udhcpc (v1.24.1) started
Sending discover...
Sending select for 192.168.1.33...
Lease of 192.168.1.33 obtained, lease time 864000
/etc/udhcpc.d/50default: Adding DNS 192.168.1.1
done.
NET: Registered protocol family 10
Starting system message bus: Unknown username "avahi" in message bus configuration file
dbus.
Starting Dropbear SSH server: dropbear.
Starting automount: automount: program is already running.
done.
Starting rpcbind daemon...done.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems...
creating NFS state directory: done
starting statd: done
starting Busybox Periodic Command Scheduler: crond... done.
crond[402]: crond (busybox 1.24.1) started, log level 8


* starting UPnP client: djmount... done.
[SCRIPT] start: Common Interface
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
* starting DLNA Server: minidlna... done.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
 * Starting uShare UPnP A/V & DLNA Media Server: ushare
   ...done.
* starting FTP Server: vsftpd... done.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
/etc/network/if-up.d/ntpdate-sync: line 45: hwclock: command not found
Timeout reached while wating for return value
Could not receive return value from daemon process.
   ...fail!
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS...
[EGAMI] Sezam

PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
enigma2 is the main pvr application... adjust oom score!
[MAIN] executing main
{508}[video_videomodepreferred_read] mode(0) not found!!!
{508}[video_aspect_write] aspect(auto) not found!!!!
{508}[video_policy2_write] policy(scale) not found
{508}[video_videomodepreferred_read] mode(0) not found!!!
{508}[video_videomodepreferred_read] mode(0) not found!!!
{508}[video_videomodepreferred_read] mode(0) not found!!!
{508}[video_videomodepreferred_read] mode(0) not found!!!
{508}[video_videomodepreferred_read] mode(0) not found!!!
Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces
Reconfiguring network interfaces...
udhcpc (v1.24.1) started
Sending discover...
Sending select for 192.168.1.33...
Lease of 192.168.1.33 obtained, lease time 864000
/etc/udhcpc.d/50default: Adding DNS 192.168.1.1
done.
grep: /etc/enigma2/settings: No such file or directory
grep: /etc/enigma2/settings: No such file or directory
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS...
[EGAMI] Sezam

PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
[MAIN] executing main
enigma2 is the main pvr application... adjust oom score!
no profile data available
{618}[video_videomodepreferred_read] mode(0) not found!!!
{618}[video_videomodepreferred_read] mode(0) not found!!!
{618}[video_videomodepreferred_read] mode(0) not found!!!
 

BCM97413B1 CFE v2.26, CFE core v2.12, Endian Mode: Little
Build Date: pon, 12 lis 2012, 11:57:49 CET (a4tech@speedy)
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1, NOR flash at CS0
NAND Flash size = 512MB
DDR Freq:      396MHz
CPU speed:     405MHz
Memory Config: 64-bit UMA
Device Tech:   1Gb
Total memory:  512MB
Boot Device:   NOR
Total flash:   4MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

CFE initialized.

[FLASH-TOOL] Searching update files...

[FLASH-TOOL] Could not init file system: Device not found

[FLASH-TOOL] There are not any update files...

Booting...
Starting splash screen.
***************************************************
Found splash image - Width = 720 Height = 576
***************************************************


Executing STARTUP...
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8267840 0x807e3840/125312 Entry address is 0x80631010
TP1 Entry Address at 0x80000ffc = 80631010
Starting program at 0x80631010

Initializing cgroup subsys cpuset
Linux version 3.6.0 (admin@ded27463-1) (gcc version 5.3.0 (GCC) ) #1 SMP Sat Apr 16 00:50:44 PDT 2016
Fetching vars from bootloader... found 10 vars.
Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=1 moca=0
         sata=1 docsis=0 pci=1 pcie=0 smp=1 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 10000000 @ 20000000 (usable)
bmem: adding 216 MB RESERVED region at 40 MB (0x0d800000@0x02800000)
Zone ranges:
  Normal   [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
  node   0: [mem 0x20000000-0x2fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81407000 s6208 r8192 d14272 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
Kernel command line:  bmem=216M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 290316k/524288k available (6394k kernel code, 233972k reserved, 1431k data, 248k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.497 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
------------[ cut here ]------------
WARNING: at /home/admin/oecore34/builds/egami/release/inihdx/tmp/work-shared/inihdx/kernel-source/arch/mips/kernel/smp.c:139 start_secondary+0x444/0x48c()
Modules linked in:
Call Trace:
[<80638350>] dump_stack+0x8/0x34
[<80025a9c>] warn_slowpath_common+0x78/0xa4
[<80025b4c>] warn_slowpath_null+0x18/0x24
[<807c858c>] start_secondary+0x444/0x48c
[<807c638c>] brcmstb_tp1_reentry+0x0/0x34

---[ end trace 4eaa2a86a8e2da22 ]---
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
PCI2.3->SDRAM window: 512 MB
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: root bus resource [io  0x0400-0x83ff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
pci_bus 0000:01: root bus resource [io  0x8400-0x87ff]
pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource upg
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.20)
msgmni has been set to 567
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
loop: module loaded
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
scsi0 : sata_brcmstb
scsi1 : sata_brcmstb
ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
Broadcom STB NAND controller (BrcmNand Controller)
bcmemac: Broadcom STB 10/100 EMAC driver v3.0
bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:1e:a0:00:01:a1)
bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
ata1: SATA link down (SStatus 4 SControl 300)
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
EBI CS1: setting up NAND flash (primary)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
DevId ecdc1095 may not be supported.  Will use config info
Spare Area Size = 16B/512B
Block size=00020000, erase shift=17
NAND Config: Reg=17152300, chipSize=512 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
timing1 not adjusted: 5363444f
timing2 not adjusted: 00000fc6
ECC level changed to 15
OOB size changed to 16
BrcmNAND mfg 0 0 UNSUPPORTED NAND CHIP 512MB on CS1

Found NAND on CS1: ACC=d7ff1010, cfg=17152300, flashId=ecdc1095, tim1=5363444f, tim2=00000fc6
BrcmNAND version = 0x0302 512MB @00000000
B4: NandSelect=50000200, nandConfig=17152300, chipSelect=1
brcmnand_read_id: CS1: dev_id=ecdc1095
After: NandSelect=50000200, nandConfig=17152300
Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
brcmnand_scan: B4 nand_select = 50000200
brcmnand_scan: After nand_select = 50000200
page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Adjust partition complete size from entire device to 1ff00000 to avoid overlap with BBT reserved space
Adjust partition rootfs size from entire device to 1f900000 to avoid overlap with BBT reserved space
Creating 3 MTD partitions on "brcmnand.0":
0x000000000000-0x00001ff00000 : "complete"
0x000000000000-0x000000600000 : "kernel"
0x000000600000-0x00001ff00000 : "rootfs"
EBI CS0: setting up NOR flash
physmap platform flash device: 04000000 at 1c000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001a00
Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
Creating 6 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000080000 : "cfe"
0x000000080000-0x000000280000 : "splash"
0x000000280000-0x000000300000 : "macadr"
0x000000300000-0x000000380000 : "nvram"
0x000000380000-0x0000003c0000 : "bootconfig"
0x0000003c0000-0x000000400000 : "facconfig"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
ata2: SATA link down (SStatus 4 SControl 300)
UBI: max. sequence number:       1985
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "rootfs"
UBI: MTD device size:            505 MiB
UBI: number of good PEBs:        4040
UBI: number of bad PEBs:         0
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 4040
UBI: number of PEBs reserved for bad PEB handling: 80
UBI: max/mean erase counter: 3/1
UBI: image sequence number:  225808210
ALSA device list:
UBI: background thread "ubi_bgt0d" started, PID 62
  No soundcards found.
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size:   500920320 bytes (489180 KiB, 477 MiB, 3945 LEBs)
UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 248k freed

INIT: version 2.88 booting

dvb: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
[platform_i2c_mutex_init] ...
fb0: brcmfb frame buffer device
{97}[MCU] ver : 2.00.25
{97}[MCU] model : RHS500R
{97}[MCU] power : SWITCH
input: dreambox front panel as /devices/virtual/input/input0
input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[stv6418_init] MACHINE_INI7000
[stv6418_init] MACHINE_INI5000
DVB: registering new adapter (dvb)
DVB: registering adapter 0 frontend 0 (DVB-T/T2 NIM)...
DVB: registering adapter 0 frontend 0 (DVB-S2 NIM)...
SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1735: No soundcards found...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30

INIT: Entering runlevel: 3

Configuring network interfaces... udhcpc (v1.24.1) started
Sending discover...
Sending select for 192.168.1.33...
Lease of 192.168.1.33 obtained, lease time 864000
/etc/udhcpc.d/50default: Adding DNS 192.168.1.1
done.
NET: Registered protocol family 10
Starting system message bus: Unknown username "avahi" in message bus configuration file
dbus.
Starting Dropbear SSH server: dropbear.
Starting automount: automount: program is already running.
done.
Starting rpcbind daemon...done.
starting 8 nfsd kernel threads: done
starting mountd: done
Mounting remote filesystems...
creating NFS state directory: done
starting statd: done
starting Busybox Periodic Command Scheduler: crond... done.
crond[402]: crond (busybox 1.24.1) started, log level 8


* starting UPnP client: djmount... done.
[SCRIPT] start: Common Interface
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting internet superserver: inetd.
* starting DLNA Server: minidlna... done.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
 * Starting uShare UPnP A/V & DLNA Media Server: ushare
   ...done.
* starting FTP Server: vsftpd... done.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
/etc/network/if-up.d/ntpdate-sync: line 45: hwclock: command not found
Timeout reached while wating for return value
Could not receive return value from daemon process.
   ...fail!
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
[EGAMI] Starting EGAMI OS...
[EGAMI] Sezam

PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 6
enigma2 is the main pvr application... adjust oom score!
[MAIN] executing main
{511}[video_videomodepreferred_read] mode(0) not found!!!
{511}[video_videomodepreferred_read] mode(0) not found!!!
{511}[video_videomodepreferred_read] mode(0) not found!!!
{511}[video_videomodepreferred_read] mode(0) not found!!!
{511}[video_videomodepreferred_read] mode(0) not found!!!
{511}[video_videomodepreferred_read] mode(0) not found!!!
{511}[video_videomodepreferred_read] mode(0) not found!!!
{511}[video_videomodepreferred_read] mode(0) not found!!!
{511}[video_videomodepreferred_read] mode(0) not found!!!
bcmemac: eth0 NIC Link is Down
bcmemac: eth0 NIC Link is Up 100 Mbps Full Duplex
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{511}[video_policy2_write] policy(scale) not found
{511}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{511}[video_policy2_write] policy(scale) not found
{511}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{511}[video_policy2_write] policy(scale) not found
{511}[video_policy2_write] policy(scale) not found
{511}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{511}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{511}[video_policy2_write] policy(scale) not found
{511}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{511}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{511}[video_policy2_write] policy(scale) not found
{511}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{511}[video_policy2_write] policy(scale) not found
{511}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{511}[video_policy2_write] policy(scale) not found
{511}[video_policy2_write] policy(scale) not found
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
{511}[video_policy2_write] policy(scale) not found
; SoftCam.Key - KeyFile ( Generated by KM-Keymaker )

; X CryptSystem      Orginal by Keymaker           

; ( I=Irdeto, S=Seca, N=Nagra, V=Viaccess, X=Conax )

; Provider ID ( 1 Bytes - Irdeto )

; Provider ID ( 2 Bytes - Seca, Nagra )

; Provider ID ( 3 Bytes - Viaccess )

; Provider ID ( 3 Bytes - Conax )

; Key ID ( 00 to 11 - Irdeto)

; Key ID ( 0C 0D 0E - Seca )

; Key ID ( 00 01 80 - Nagra )

; Key ID ( 08 to 0F - Viaccess )

; Key ID ( 01 - TPSCrypt2 )

; Key ID ( E1 N1 N2 - Nagra MECM keys )

; Key ID ( 20 21 ... - Conax )
; Key ( 8 Bytes - Irdeto, Seca, Nagra, Viaccess1 )

; Key ( 16 Bytes - Viaccess2, TPSCrypt2 )

; Key ( 64 Bytes - Nagra MECM keys )

; exp + mod Key ( 128 Bytes - Conax )no

;======================================

;             Nagra Aladin           --

;--------------------------------------

N A401   00 CAAAE88F16DF269A ;Antena H
N A401   01 79B593B47D13FB5E ;Antena H
N A501   00 CAAAE88F16DF269A ;Antena H
N A501   01 79B593B47D13FB5E ;Antena H
;
N 1811   00 E1031C6E17A06EA8 ;Mediapark
N 1811   01 D3B77ECD6082374A ;Mediapark
N 1911   00 E1031C6E17A06EA8 ;Mediapark
N 1911   01 D3B77ECD6082374A ;Mediapark
;
N C001   00 7DEC1B9EDF82FF40 ;GlobeCast
N C001   01 2A9349EAA7B915EE ;GlobeCast
N C101   00 7DEC1B9EDF82FF40 ;GlobeCast
N C101   01 2A9349EAA7B915EE ;GlobeCast
;
N 4201   00 79E93F290EBF55DA ;TVE America
N 4201   01 69DCF5833947E9BC ;TVE America
N 4301   00 79E93F290EBF55DA ;TVE America
N 4301   01 69DCF5833947E9BC ;TVE America
;
N 3C01   00 FA1E93353AA81F4A ;Visavision
N 3C01   01 309B960BA75539F4 ;Visavision
N 3D01   00 FA1E93353AA81F4A ;Visavision
N 3D01   01 309B960BA75539F4 ;Visavision
;
N 4601   00 322E89D38789745E ;Euskaltel
N 4601   01 B6A150DC49F1FF8E ;Euskaltel
N 4701   00 322E89D38789745E ;Euskaltel
N 4701   01 B6A150DC49F1FF8E ;Euskaltel
;
N EE01   00 427DF30E9542C0C4 ;B4U Movies
N EE01   01 427DF30E9542C0C4 ;B4U Movies
N EF01   00 427DF30E9542C0C4 ;B4U Movies
N EF01   01 427DF30E9542C0C4 ;B4U Movies
;
N 3A01   00 F9A4D72ADBA134D2 ;Teleclub Swiss
N 3A01   01 B6F69CC3430A6A87 ;Teleclub Swiss
N 3B01   00 F9A4D72ADBA134D2 ;Teleclub Swiss
N 3B01   01 B6F69CC3430A6A87 ;Teleclub Swiss
;
N 3801   00 D12ECF4769546786 ;Digital Swiss
N 3801   01 25F48BCFD893FB5F ;Digital Swiss
N 3901   00 D12ECF4769546786 ;Digital Swiss
N 3901   01 25F48BCFD893FB5F ;Digital Swiss
;
N 7201   00 8DDBEE82A3C67F50 ;Cablecom Swiss
N 7201   01 D24570D790A398BE ;Cablecom Swiss
N 7301   00 8DDBEE82A3C67F50 ;Cablecom Swiss
N 7301   01 20BA75420B4596CD ;Cablecom Swiss
;
N 5401   00 A95D4EFE20E12D03 ;NTL (Ireland)
N 5401   01 886B697E94B6BB1E ;NTL (Ireland)
N 5501   00 A95D4EFE20E12D03 ;NTL (Ireland)
N 5501   01 886B697E94B6BB1E ;NTL (Ireland)
;
N 5A01   00 CF530C3379617185 ;Telewest(UK Cable)
N 5A01   01 525E8D45FC75F64A ;Telewest(UK Cable)
N 5B01   00 CF530C3379617185 ;Telewest(UK Cable)
N 5B01   01 525E8D45FC75F64A ;Telewest(UK Cable)
;
N 5C01   00 BBA9DC6B4CC4705F ;C&W (UK Cable)
N 5C01   01 4EC4484DB7D3A41B ;C&W (UK Cable)
N 5D01   00 BBA9DC6B4CC4705F ;C&W (UK Cable)
N 5D01   01 4EC4484DB7D3A41B ;C&W (UK Cable)
;
N 5E01   00 CE192E8780617490 ;Chorus (Ireland)
N 5E01   01 AA269EF2E914D1AE ;Chorus (Ireland)
N 5F01   00 CE192E8780617490 ;Chorus (Ireland)
N 5F01   01 AA269EF2E914D1AE ;Chorus (Ireland)
;
N C801   00 E134079992603E3B ;RTN
N C801   01 AF96389F9259304A ;RTN
N C901   00 E134079992603E3B ;RTN
N C901   01 AF96389F9259304A ;RTN
;
N 1C01   00 BA5495689F921D99 ;Tv Barbados
N 1C01   01 7B8EBC1C9EE584D8 ;Tv Barbados
N 1D01   00 BA5495689F921D99 ;Tv Barbados
N 1D01   01 7b8ebc1c9ee584d8 ;Tv Barbados
;
N 2D01 E0 ABFA8F59FF24B11DD439F238E9684C63C01CE2CFA6EDE50191055003DF9B184D053EBAA023F305A5348F78BFEC9466000DFABA379CD3AAB3F5882B50CA28F772
N 2D01 N0 A9DA74CC38B6B88CF29EE966ADDBC3CC59784EB0D71D788FFF10ECFE98FA659F095D1771B5EC88F7CED6341F63DF9980137798536A3D808D704D41782FBD72AC
N 2D01 N2 83E5F4A1EEC79A331B15CF44AD656104D393FA62CB77425F4E106B0D84938232CCF799E7AFBAA04764A9759E06002985DFC47C9F7888B03CB6F47A606E8F73DA
N 4E01 E1 AB8790F9C43F4866032AA23D2C8E617E292D07C93B874F7D569AA04B668A61FB0517682B520C33158

Снятый лог без кам модуля сигнал держит без проблем , но когда включаешь викард 1.18 вырубает все приходится перегружать ресс.
User avatar
vladimir451963
Linux User
 
Posts: 30
Joined: 04 Jul 2016, 17:38
Receiver: Sezam 5000HD
Skype: vladimir451963

by Debian » 14 Aug 2016, 05:02

На моем бекапе стоит уже викард, там надо только закинуть ваш конфиг и активировать эмулятор по синей кнопке.
Как проверяли, что держит сигнал, на открытых каналах?
User avatar
Debian
Admin
 
Posts: 2176
Joined: 14 Feb 2013, 04:53
Receiver: Sezam
Image: EGAMI
Skype: esc.shell

by vladimir451963 » 14 Aug 2016, 10:38

на открытых и закрытых каналах потом настроил кардшаринг
http://fullshara.net/?accesscheck=%2Fpr ... er_program каналы все показывали кроме бисс на этом сайте не под бисс настройки. Настраивал через универсальный конвертор GI 212 с двумя независимыми выходами, но что-то опять не понял, когда отключил ресивер с Cam модулем и картой Humax 2000 hd исчезли сигналы на Sezame 5000. Включаю ресивер Humax появляются сигналы появились или так настроена кардшаринг.
User avatar
vladimir451963
Linux User
 
Posts: 30
Joined: 04 Jul 2016, 17:38
Receiver: Sezam 5000HD
Skype: vladimir451963

Next

Return to Sezam community